Revolabs TV Converter Box 07 stemic ppp User Guide

Line-to-Mic Converter  
Users Guide  
The Revolabs Solo™ Line-to-Mic Converter cable is designed to facilitate Revolabs system installations  
requiring attenuation from line level to microphone level as found on many videoconferencing systems  
and audio mixers. The cable also blocks phantom power bias voltages up to 48V.  
To use the Line-to-Microphone level converter cable:  
Step One:  
Step Two:  
Plug the 2.5mm mini-plug into the Solo Executive Single Channel analog line level input.  
Insert the XLR Male connector to a microphone-level (-40dB) input channel on the audio mixer or  
video codec.  
Step Three: If desired, use the return audio RCA Female connector to monitor audio from the mixer / video  
codec through an earpiece connected to the microphone.  
Cable Specifications  
Length: 6 Ft (1.8m)  
Connectors: 2.5mm Male mini-plug, RCA Female, XLR Male with Phantom-blocking 40 dB signal attenuation circuit  
Model: 07-STEMIC-PPP  
Warranty  
Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective  
part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.  
Rev 1.1 10/07  
 

Quartz Plumbing Product QZ3111 User Guide
Radio Shack Motorized Toy Car 60 390 User Guide
Rangemaster Cooktop RI77 User Guide
Roland Guitar G 33 User Guide
Salton Gas Grill GP160A User Guide
Samsung Air Conditioner DB98 17032A5 User Guide
Samsung Computer Monitor 1100DF User Guide
Samsung Flat Panel Television VT2570 User Guide
Samsung MP3 Player DVD V9650 User Guide
Sanyo Battery Charger N 50AAAS User Guide