Revolabs Microphone XG 80 User Guide

Revolabs FusionTM Microphone System — Sony XG-80 Setup Guide  
This setup guide will guide you through the steps needed to properly connect a  
Revolabs Fusion Microphone System to a Sony XG-80 video codec.  
Note: It is important to carefully follow these instructions in order and completely.  
Otherwise your Fusion Microphone System and/or the video codec may not function  
properly. Please read through these instructions completely before proceeding.  
Contact Revolabs technical support if you have any questions.  
Requirements for connecting systems:  
1. Revolabs Fusion 4 or 8 channel Microphone System  
2. Sony XG-80 video codec  
3. QTY 1 Female XLR—1/8” mono male cable* (i.e. Calrad 10-144)  
4. QTY 1 RCA male — RCA male cable  
5. Amplified Speakers  
* Optional Item  
 
Configuring the Sony XG-80 Video Codec  
1. Push the TOOLS button on the remote control  
2. Select SETUP  
3. Select AUDIO 1  
4. Select AUDIO INPUT as MIC  
5. Verify that Mic (A1/A3) has a checkmark  
6. Turn ECHO CANCELLER to OFF  
7. Verify INPUT as MONAURAL  
8. Increase Sony volume level on remote to maximum  
NOTE: You must use your Fusion remote control to control the room volume  
for both the audio and video conference calls. Adjusting the volume in the  
video codec will cause echo.  
 

RCA DVD Player RTD315W User Guide
RCA Universal Remote RCRN03BR User Guide
Ricoh Network Card BB HPL10A R User Guide
RIDGID Saw R3203 1 User Guide
Roland Electronic Keyboard FR 1 User Guide
Rolls Switch ABC904 User Guide
Samsung Digital Camera DV150FBK User Guide
Samsung DVD Player DVD AR650 User Guide
Samsung Refrigerator DA99 00743A User Guide
Saturn Automobile 2004 Ion User Guide