Revolabs Microphone QSG TTM User Guide

Revolabs Quick Start Guide  
Using a Solo TableTop Wireless Microphone  
Remove the microphone from the Charger Base. The microphones  
#
turn on and mute themselves automatically when removed from  
Step 1  
Charger Base (flashing RED LED) to prevent handling noise while  
placing the microphone on the table.  
The TableTop microphone should be centered on the table in front of  
#
users, between 2 to 5 feet (.75 to 1.75m) away. It is always better to  
Step 2  
put the microphone as close as possible to the person speaking, but  
avoid placing the microphone where it might be blocked by laptops  
2 to 5 feet (.75 to 1.75m)  
or paperwork.  
Flashing red = muted  
With the microphone in position, un-mute the microphone by  
Flashing green = un-muted  
#
pressing and releasing the MUTE button (confirm by viewing  
Step 3  
flashing GREEN LED).  
Mute/un-mute toggle button  
To turn microphones off, first mute the microphone, and then plug  
#
it into the Charger Base. Make sure the RED LED turns on.  
Step 4  
Optionally, the microphone can be turned off manually. Simply press  
and hold the MUTE button for ~10 seconds until the LED turns solid  
RED and release button.  
You are now ready to experience wireless, rechargeable and  
secure (encrypted) collaborative freedom.  
Revolabs Inc • 63 Great Road, Maynard, MA 01754 • 1-800-326-1088 • www.revolabs.com • [email protected]  
 

Radio Shack Car Video System PLVWR7200F User Guide
Radio Shack Scanner Pro 2032 User Guide
Radio Shack Surge Protector 61 2429 User Guide
RCA MP3 Player M3804 User Guide
Roland Musical Instrument Amplifier KC 880 User Guide
Samsung Cell Phone E330 User Guide
Samsung Indoor Furnishings SI M8V073BB1EU User Guide
Samsung Laptop 700Z5C User Guide
Sanyo Projector PLC SW30 User Guide
Sears Lawn Aerator S A 4 0 0 B H User Guide